Kikusui PFX2500 Series, Operation Manual

Page: 6 / 144

6
PFX2512
Note the following points when moving the
product to the installation location or when
transporting the product.
• Turn the POWER switch off.
Moving the product with the POWER switch turned on may
cause electric shock or damage to the product.
• Remove all wiring.
Moving the product with the cables connected may cause wires
to break or injuries due to the product falling over.
• Increase the number of people or take other safety measures
when carrying the product over a slope or across steps.
• When transporting the product, be sure to use the original
packing materials.
Otherwise, damage may result from vibrations or from the
product falling during transportation.
• Be sure to include this manual.
Be sure to observe the following precautions
when installing the product.
• Do not use the product in a flammable atmosphere.
To prevent the possibility of explosion or fire, do not use the
product near alcohol, thinner, or other combustible materials,
or in an atmosphere containing such vapors.
• Avoid locations where the product is exposed to high
temperature or direct sunlight.
Do not install the product near a heater or in areas subject to
drastic temperature changes.
Operating temperature range: 0 °C to +40 °C (32 °F to 104 °F)
Storage temperature range: -10 °C to +60 °C (14 °F to 140 °F)
• Avoid humid environments.
Do not install the product in high-humidity locations such as
near a boiler, humidifier, or water supply.
Operating humidity range: 20 %rh to 85 %rh (no condensation)
Storage humidity range : 0 %rh to 90 %rh (no condensation)
Condensation may form even within the operating humidity
range. If this happens, do not use the product until the
condensation dries up completely.
• Be sure to use the product indoors.
This product is designed for safe indoor use.
• Provide adequate space around the power cord plug.
Do not insert the power cord plug into an outlet that is not
easily accessible. Do not place objects near the power cord plug
that would make it difficult to access.
• Do not install the product in a corrosive atmosphere.
Do not install the product in a corrosive atmosphere or in
environments containing sulfuric acid mist, etc. This may cause
corrosion of various conductors or reduce the quality of the
connector contacts inside the product, and this could lead to
malfunction, failure, and possibly fire.
• Do not install the product in a dusty location.
Dust accumulation can lead to electric shock or fire.
• Do not use the product in a poorly ventilated location.
Provide adequate space around the product for air to circulate
around it.
• Do not place objects on top of the product.
Placing heavy objects on top of the product may cause
malfunction.
• Do not install the product on an inclined surface or in a location
subject to vibrations.
The product may fall or tip over and cause damage and injury.
• Do not use the product in a location subject to strong magnetic
or electric fields or in a location where the input power supply
signal contains large amounts of distortion or noise.
Doing so may cause the product to malfunction.
• For KC mark.
이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기
기로서 가정용 환경에서 사용하는 경우 전파간섭의 우려가 있습니
다 .
Precautions When Moving the Product
Precautions Concerning Installation
This equipment is not intended for use in residential
environments and may not provide adequate
protection to radio reception in such environments.
CAUTION