Kikusui PFX2500 Series, Operation Manual

Page: 41 / 144

PFX2512
41
2
C
o
nnec
ting and C
o
nfiguring De
vic
e
s
Preparing to Connect the DUT (Battery)
The PFX2512 does not come with cables for connecting to the DUT (battery). Prepare the following
cables according to the DUT (battery).
p. 25
、
p. 123
There is an optional TL08-PFX cable that contains cables for connecting PFX2512 and the DUT
(battery).
■
Cables and tools that are necessary to make the connection
See
Wire
• DUT cable
(stranded wire)
Cable for running charge/discharge current between the PFX2512
and DUT (battery)
See Table “Nominal cross-sectional area of wires and allowable
currents (reference)” (
p. 30 )
• Voltage sensing cable
Cable for sensing the electrode voltage of the DUT (battery)
0.20 mm
2
(AWG24) to 0.52 mm
2
(AWG20), shielded cable
See “ Constructing sensing cables” ( p. 42 )
• Temperature sensing cable
Cable for sensing the temperature of the DUT (battery)
0.20 mm
2
(AWG24) to 0.52 mm
2
(AWG20), shielded cable
See “ Constructing sensing cables” ( p. 42 )
Flat-blade screwdriver Shaft diameter: Ø3, blade tip width: 2.6 mm
Wire stripper A wire stripper that matches the wires listed above
DUT cable
PFX2512
Example of the connecting configuration of the PFX2512 and the DUT (battery)
Temperature sensing cable (Shielded wire)
Thermistor
DUT (battery)
Voltage sensing cable
(Shielded wire)
+
+
S
+ DUT
–
– DUT
–
S
+
T
–
T