Kikusui PFX2500 Series, Operation Manual

Page: 32 / 144

32
PFX2512
Connecting the Devices
■
Connecting the chassis terminal
The chassis terminal is a grounding terminal designed for many purposes. It can be effective in
reducing noise and preventing malfunction during large current operation. In the event a cable
or the like makes contact with the chassis, the terminal prevent electric shock accidents. To
perform charge/discharge tests safely, we recommend that you ground the chassis terminal.
For the chassis terminal grounding cable, use a cable that can handle at least the maximum
current that will flow during charge/discharge tests.
■
Connecting the devices
The following shows an example of system configuration which consist of 1set of the Charge/
Discharge System Controller (PFX2512), 1 set the DC power supply (PWR1201ML), and 2sets of
the Electronic load (PLZ1205W) in parallel operation. As for the parallel operation of the
Electronic load units (PLZ1205W), locate the master unit with a position nearest to the PFX2512.
Example of a charge/discharge unit with two electronic loads (PLZ1205Ws) connected in parallel
+
–
PLZ1205W master unit
PLZ1205W slave unit
PWR1201ML
PFX2512
DUT (battery)
DUT cable
(Option: TL08-PFX)
Cable with
solderless terminal
(included)
Cable with
solderless terminal
(included)
Parallel operation
signal cable kit
(Option:
PC01-PLZ-5W)
I/F cable for PLZ-5W
Electronic load
(Option:
SC05-PFX)
I/F cable for PWR-01
DC power supply
(Option:
SC07-PFX)
Terminal cover
Example of complete connecting
figure of the rear panel