Keysight Technologies U3022BH10, User'S And Service Manual

Page: 83 / 124

U3022BH10 Control Lines
Control Lines
The 15 pin female D-Sub connector on the rear panel provides 8 latched data lines that can be
used to control your device under test (DUT). The lines can be controlled with the multiport
external test set control, or Test Set I/O commands. Refer to
"External Test Set Control
Operation" on page 47 and "Setting the Control Lines with Address and Data Values" on
page 82 . See Table 19 below for DUT control line specifications.
The output voltage of the lines can be from the internal adjustable voltage source (+2 to +5 Vdc),
or an external DC power supply depending on how the connection to the control line is
configured. When using an external power supply a positive or negative voltage can be used.
Refer to
Figure 64 and Table 20 on page 84 for control line pin location and description. Refer to
"Internal Voltage Supply Configuration" on page 85 and "External Voltage Supply Configuration"
on page 86 for configurations.
Table 19 DUT Control Specifications
Item Specifications
Connector Type D–Sub, 15–pin female
Max Output Line Current 100 mA (each line)
Control Line DC resistance < 10 Ω (each line)
Voltage Range:
Positive Input 0 to +5 V
Negative Input –5 to 0 V
Internal Variable Voltage +2 to +5 V
U3022BH10 User's and Service Guide 83