U3022BH10
Description
Description
The Keysight U3022BH10 is a 10-Port Multiport Test Set Extension that is designed to be
configured for high power measurements in either a 14 or 24-Port network analyzer
measurement system.
The Keysight U3022BH10 has the following key features:
•
Capable of handling
1
"High Power Measurements" on page 63
).
•
Compatible for use with Keysight U3020AH37 Switch Matrix.
•
10 Test Ports (3.5 mm male connectors).
•
Low loss mechanical RF switching.
•
Frequency range of operation, 10 MHz to 26.5 GHz.
•
A Keysight PNA-X with Option 551 is required with a rear panel Test Set I/O interface for
operational control. An external personal computer is not required.
The Keysight PNA-X Network Analyzers will be referred to throughout this
document as the PNA-X. The U3022BH10 will be referred to as the Test Set.
Table 1
U3022BH10 Accessories Supplied
Description
Part Number
Quantity
Short, Coax 3.5 mm (female)
Cable Assembly, I/O Test Set
RF Cable, Semi-Rigid, Front Panel Jumper
RF Cable, Semi-Rigid, PNA-X Interface
User's and Service Guide, U3022BH10
Ports Label Sheet
85052-60007
N4011-21002
N5222-20091
U3022-20214
U3022-90010
U3024-80001
1
1
16
8
1
1
Verifying the Shipment
To verify the contents shipped with your product, refer to the "Box Content List" included with the
shipment. Inspect the shipping container. If the container or packing material is damaged, it
should be kept until the contents of the shipment have been checked mechanically and
electrically. If there is any physical damage, refer to
"Contacting Keysight" on page 123
damaged shipping materials (if any) for inspection by the carrier and a Keysight representative.
The upper frequency measurement limit is 18 GHz when the U3020AH37 is
used.
1. The sixteen front panel cables were installed on the Test Set front panel at the factory.
2. Option 129 accessory.
1
RF Cable, Semi-Rigid, ECal Jumper
U3022-20238
1
2
U3022BH10 User's and Service Guide
11
