U3022BH10
Controlling the System with the PNA-X
External Test Set Control Operation
To verify that the network application has the Test Set interface features, select
Trace/Chan > Channel > Hardware Setup > External Test Set > Other -OR-
(Instrument > Setup > External
H
ardware > External
Device
... > Multiport
> Other
Test
Set
Setup...)
. The Test Set will be displayed as External Test Set Control-U3022BH10_PNA-X.
Figure 37
External Test Set Control
When in 24-Port mode
,
External Test Set Control DUT control lines are disabled.
This menu will allow the physical ports to be identified as any port number for your
convenience. For example, Port 5 can be re-named Port 2.
The External Test Set Control-U3022BH10 also allows control of the DUT control lines; refer to
. To change the state from LOW to HIGH, select the graphical user
interface (GUI) for the specific control (LINE 1 thru 8), click OK. Each line can be controlled
separately.
U3022BH10 User's and Service Guide
47
