276
Keysight N5990A MIPI M-PHY Receiver Test User Guide
8
Sys Burst Tests
• Reference Clock Calibration
• Level Calibration Terminated / Into Open
Results
An example of a HTML Viewer for the Test 2.3.3-SYS-RX Common Mode
Input Voltage Amplitude Tolerance test procedure is shown in
.
The results comprise of the following:
• The common parameter list (in
Expert Mode
).
• A test data table (Refer to
Figure 160
Example HTML Viewer for Test 2.3.3-SYS-RX Common Mode Input Volt-
age Amplitude Tolerance Test
Table 50
Test 2.3.3-SYS-RX Common Mode Input Voltage Amplitude Tolerance Test data table
Parameter Name
Parameter Description
Result
"Pass"/"Fail" - If the value is "Fail", the amplitude tolerance is below the spec limits.
Amplitude
It is the amplitude value to be tested.
Offset
It is the offset value to be tested.
Min Passed Offset
It is the minimum offset value, where the DUT works without errors.
Min Spec Offset
It is the minimum offset value, where the DUT must work successfully.
Summary of Contents for N5990A
