Keysight Technologies N5990A, User Manual

Page: 47 / 318

Keysight N5990A MIPI M-PHY Receiver Test User Guide 47
N5990A M-PHY Station 2
Figure 17 Select M-PHY Sequences panel
Wildcards
A wildcard is an expression or symbol that is used especially to represent
any value when selecting specific file names or directories. This section
refers to the wildcard’s availability in the N5990A M-PHY for the sequence
file names selected in the Select M-PHY Sequences panel (see Figure 17 ).
The default sequence names do not use wildcards and are used for all
tests and setup procedures with out applying a change. If a wildcard
sequence name is provided, the sequence name is replaced with different
names during run time depending on the test specifics. It is your
responsibility to provide such sequence files in the M-PHY pattern
directory (by default C:\ProgramData\BitifEye\N5990A\Pattern\MPhy ).
The supported wildcards are as listed below in Table 2 (none are
mandatory).
Table 2 Supported Wildcards
Wildcard Values
[Type] RX, TX
[LsGear] PWM1, PWM2, PWM3,..PWM7
[HsGear] Gear1A, Gear1B,...Gear3B
[Mode] Cont, Burst
[Amplitude] Large, Small
[Channel] Data0, Data1, Data2, Data3, and DataAll
[Terminated] RT, NT