Keysight N5990A MIPI M-PHY Receiver Test User Guide
85
Calibrations
4
Figure 40
Connection Diagram for Reference Clock Calibration (for N4903B)
Parameters
The parameters used in
Expert Mode
for this calibration, are as follows:
• Oscilloscope bandwidth
• Amplitude Range
• Offset Range
• Use Infiniisim
• Transfer Function Chan1
• Filter Delay Chan1
• Max. Time Span Chan1
These parameters are listed in
.
Dependencies
No procedure is required for this calibration.
Results
An example of a HTML Viewer for the Reference Clock Calibration
procedure containing two results is as shown below (see
and
). The results comprise of the following:
• A calibration data graph.
• The common parameter list (in
Expert Mode
).
• A data table for the offset and amplitude that are being calibrated.
(Refer to
Summary of Contents for N5990A
