Safety PLC
Kendrion Kuhnke Automation GmbH
442
17 May 2021
5.8 Safety Modules
5.8.1 Kuhnke FIO Safety PLC
There is a separate instruction manual available for the Kuhnke FIO Safety PLC. For further information,
please click the link below.
Link to the documentation:
http://productfinder.kuhnke.kendrion.com
Technical Data
Type
Safety control unit
Safety protocol
FSoE
Safety standard
IEC 61508 SIL3 and DIN EN ISO 13849-1 PLe
Approval
CE, cULus, TÜV Rheinland
Runtime system
CODESYS RT Safety
Programming tool
CODESYS v3.5 SP5 or higher with integrated safety function modules
E-bus power consumption
200 mA
– 300 mA
Supply voltage
From bus coupler through E-bus connector
Electrical interference
EN 61000-6-2/EN 61000-6-4
Resistance to vibration
EN 60068-2-6
Impact resistance
EN 60068-2-27
Fieldbus port
EtherCAT
®
100 Mbps LVDS: E-bus
Installation / mounting
position
35 mm DIN rail / horizontal
Signal indication
Status LEDs (EtherCAT, Safety, Power)
Shield
Provided directly by the module
Terminals
-
Ambient conditions
0 °C …+55 °C, IP 20
Housing
Plastic shroud over aluminium frame, 25 x 120 x 90 [mm]