Kendrion 694 411 00, Instruction Manual

Page: 454 / 467

Configuration Kendrion Kuhnke Automation GmbH
454
(E 747GB-V2)
17 May 2021
Online Configuration
EtherCAT allows you to scan the stations connected to an Ethernet line. The example below illustrates how
to identify the actual configuration of an I/O unit consisting of a Kuhnke Controller 113, a Kuhnke FIO AI8-I
module, and a Kuhnke FIO AI8-Pt/Ni/Tc module.

Connect Kuhnke Controller 113 to the Kuhnke FIO AI8-I module and the Kuhnke FIO AI8-Pt/Ni/Tc
module and turn on the power supply.

Use a CAT5 cable to connect your PC's Ethernet port to your CoDeSys3 controm unit (Kuhnke
Controller 113) (both a patch cable and a crossover cable will work).

Run CoDeSys V3.

Open a project for your CoDeSys3 control unit (Kuhnke Controller 113).
 Select "Device (…..Kuhnke FIO Controller 113)" and pick "Gerät anhängen" (add device).

Configure an EtherCAT master by adding an "EtherCAT Master" supplied by 3S-Smart Software
Solutions GmbH to your device.