Counter / Encoder (694 454 53)
Kendrion Kuhnke Automation GmbH
288
17 May 2021
5.5.3 Kuhnke FIO Drive Control
There is a separate instruction manual available for Kuhnke FIO Drive Control from the FIO range.
For further information, please click the link below.
Link to the documentation:
http://productfinder.kuhnke.kendrion.com/de
Technical Data
Type
Kuhnke FIO Drive Control
Motor connection
2-phase stepper motor or brushless DC motor
Power supply
electronics 24 VDC, motor 12..72 VDC (cULus 12..48 VDC)
Nominal current
5 A, max 55°C, 5A @ 12..24 VDC / 4A @ 48 VDC)
Peak current
stepper motor: 10 A / brushless DC motor: 15 A
Incremental encoder
5V / 24V (A, /A, B, /B, Z, /Z)
Hall generator
24 V (H1, H2, H3) or 3 extra low side switching digital inputs
Digital inputs
5x 1 ms (configurable, reference switch, limit switch, enable)
Digital outputs
1x 0.5 A (brake output or standard output)
Fieldbus port
EtherCAT® 100 Mbps LVDS: E-bus
Installation
35 mm DIN rail
Signal indication
LED located next to the terminal
Shield
provided directly by the module
Terminals
spring-assisted combi plug w/ mechanical ejector
Ambient conditions
0 °C…+55 °C, IP 20, immunity to noise: Zone B to EN61131-2
Housing (W x H x D)
aluminium frame, plastic 25 x 120 x 90 [mm]
Approval
CE, cULus
