Kendrion Kuhnke Automation GmbH
AI 4/8-U
159
17 May 2021
Information
If the inputs are not used but switched on, the measured values displayed in the I / O image are
floated. To prevent this, you should deactivate the measurement channel at the start parameters
or set the input to ground (short-circuit when measuring differential signals).
To Set up the Options
Conversion of the analogue values can be synchronised with DC (Distributed Clocks) or SM (Sync
Manager).
The process data objects stored as variables in the EtherCAT master's control program are used to access
the input values and the module state.
