Kendrion Kuhnke Automation GmbH
CAN Master/Slave
431
17 May 2021
Byte
Name
Explanation
13
Data[5]
14
Data[6]
15
Data[7]
Configuration
To set the baud rate, go down the device tree and find the CAN node immediately underneath the Kuhnke
FIO CAN Master/Slave module.
Information
The Kuhnke FIO CAN Master/Slave module does NOT support all CODESYS baud rates (refer
to the object dictionary).
The following baud rates are supported:
100, 125, 250, 500 and 1000 kBit/s
Go to the startup parameters of the CAN module to enable or disable data synchronisation.
Select the module and go to "Startparameter" (startup parameters) and "Hinzufügen" (add).
