Kendrion Kuhnke Automation GmbH
AI 4 Pt/Ni/Tc
189
17 May 2021
5.4.8 AI4-Pt/Ni/TC
Terminals
The module needs no separate 24V connector. Power is supplied to the module through the E-bus
connector.
Operative earth / shielding of analogue wires
section 0
Information
Module 694 443 57 Kuhnke FIO AI4-Pt/Ni/TC is the INCOMPATIBLE successor to the following
modules:
694 443 01
Ventura FIO AI4-Pt/Ni100
694 443 03
Ventura FIO AI4-Pt/Ni1000
694 443 05
Ventura FIO AI4-TE
The module complies with ETG guidelines.
Before replacing a Ventura FIO AI4-Pt/Ni100 or 694 443 03 Ventura FIO AI4-Pt/Ni1000 or 694
443 05 Ventura FIO AI4-TE (694 443 01) with a Kuhnke FIO AI4-Pt/Ni/TC module (694 443 57),
you must modify the EtherCAT master's control program.
Status LEDs
LED "EtherCAT Run"
The LED labelled "EtherCAT Run" indicates the state of the EtherCAT ASIC.
Initialising, no data exchange
Pre-operational, no data exchange
Safe operation, inputs readable
Operational, unrestricted data exchange
LED "IO"
The LED labelled "IO" indicates the state of the module's I/Os.
State
LED flash code
Explanation
Ok
Green, on
No error
Front view of I/O module AI4-Pt/Ni/Tc
I/O connection