Kendrion Kuhnke Automation GmbH
Modification History
5
17 May 2021
Modification history
Date
Comments / modifications
29 May 2015
Original version
31 Aug 2015
Plus chapters on AO, AI-U, AI-I
11 Nov 2015
Plus chapter on DI16/DO16 bus coupler
01 Mar 2016
Plus chapter on Counter/Posi2, new UL logo
07 Mar 2016
Analogue modules corrected
26 Apr 2016
Addition to 2-row digital terminals: L+ and L- are both internally jumpered (5.3.1)
Note on installation position added (Position)
Note added on order of modules in multi-FIO systems (Order of Modules in Multi-FIO
Systems)
Connector sleeves for Weidmüller connector (General Instructions)
06 June 2016
Chapter Relay Modules added
10 July 2016
Tables of sensor values revised (5.4)
10 Nov 2016
Chapter Thermal Modules revised (5.4.8 / 5.4.9)
25 Nov 2016
Data types modified in chapter Counter2 CounterPosi2 (5.5.1)
17 Jan 2017
Chapter Analogue Output Modules revised (5.4.2 / 5.4.3)
20 Jan 2017
Chapter General Instructions revised under connector sleeves
23 Feb 2017
Note on unused encoder signals in chapter Counter2 CounterPosi2 (5.5.1)
03 Feb 2017
Table of sensor values revised in chapter 5.4.2 / 5.4.3, UL logo added for 16/16 bus coupler
added to chapter 5.2.2
08 Mar 2017
New thermo module sub-chapters on cold point compensation and calibration (5.4.8 / 5.4.9)
21 Mar 2017
Chapter 5.4.2 AO4-U/I - 12-Bit
“ revised with regard to compatibility with the module's
predecessor
25 Aug 2017
Formatting of entire Instruction Manual revised.
New FIO modules added
– communication modules, chapter 5.7
Technical data of complex FIO modules added (Controller/Safety/Drive/CAM)
Old modules removed from manual (separate Instruction Manual on FIO V1 modules)
Translation
31 Aug 2017
Inserting a note for the AI-U modules
01 Dez 2017
Device "Kuhnke FIO DO8 2A" Order number 694.452.06 ID: 190485 added
02 Mar 2018
Revision of the complete manual with regard to the Low Voltage Directive.
Renaming in chapter Bus Coupler DI16 / DO16 - U24_Load to undervoltage_load and
U24_Logic to undervoltage_logic
14 Jan 2019
Mounting instructions for the potential distributor added.
Added information for recommended Ethernet cable.
03 Jul 2019
FIO Bus Coupler DI8 DO8 and DI8 DO4 added.
Info about the new Safety Modules added.
28 Jan 2020
Design change and analog module Kuhnke
29 Jan 2021
Minor corrections in the document
30 Mar 2021
Modules DI16 2-wire and DO16 2-wire added
