D3-DA 3xx/x
Appendix: Further components
Project engineering manual V1.07
114
© KEBA
Information
All accessoires may only be used with modules of the KeDrive D3 series.
16.3
Connection technology
This chapter describes the various cables for connecting motors, which are
available as accessories from KEBA.
Caution
If D3-DA 3xx/x connection cables are equipped with an user specific con-
nector and not with KEBA proposed connector, reduced electromagnetic im-
munity is possible. In this case the user has to ensure that the requirements
of the EMC directive are met.
16.3.1
Connection cable XW P0x-xxx
Fig. 16-55: Structure of the connection cable XW P0x-xxx
S1
... Connector motor-sided
S2
... Connector drive control system-
sided
1
... Outer and inner shields connected
to copper strip
2
... Shrinking tube overlaps the copper
strip (5 mm)
3
... Shield is fixed at the mounting plate
4
... Cable of length L
PE
... Not connected
Pin assignment at connection cable XW P0x-xxx
Signal
Connector S1
(Motor-sided)
Color of wires /
identification
Connector S2
(Drive control
system-sided)
U
1
Black, white figure 1
U
PE
2
Green-yellow
n.c.
V
3
Black, white figure 2
V
