D3-DA 3xx/x
Introduction
Project engineering manual V1.07
10
© KEBA
Target group
Prerequisite knowledge and abilities
Electrician
Professional training in electrical engineering (based on indus-
try- standard training guidelines).
Knowledge about:
●
current valid safety regulations,
●
wiring guidelines,
●
circuit diagrams,
●
professional installation of electrical connections.
Programmer
Basic technical training (technical college, engineer training or
corresponding professional experience).
Knowledge about:
●
current valid safety regulations,
●
method of operation of a PLC,
●
programming of an safety PLC.
Start-up operator
Basic technical training (technical college, engineer training or
corresponding professional experience).
Knowledge about:
●
current valid safety regulations,
●
fundamental validation concepts according to EN ISO
13849,
●
the method of operation of the machine or system,
●
fundamental functions of the application, system analysis
and troubleshooting,
●
setting options on the operating devices.
Service technician
Basic technical training (technical college, engineer training or
corresponding professional experience).
Knowledge about:
●
Method of operation of a PLC,
●
current valid safety regulations,
●
fundamental validation concepts according to EN ISO
13849,
●
method of operation of the machine or system,
●
diagnostic options,
●
systematic fault analysis and remedial action.
1.3
Intended use
The D3-DA 3xx/x is intended for installation in stationary electrical systems
or machines and was developed for controlling of drives.
