Kärcher KM 170/600 R LPG, Manual

Page: 30 / 474

-
12

Replace the dust filter.

Close the filter cover.
The V-belt drive has an automatic tension-
ing device; the V-belt tension cannot be ad-
justed.

Check the V-belt. Have defective parts
replaced by Customer Service.
Have the inspection done according to
the service manual.
1 Lock
2 Air filter housing

Open the lock.

Remove the air filter housing.

Replace the air filter insert.
Note : Installation position with blowout
opening pointing down (see illustra-
tion).

Unscrew the wing nut from the centrifu-
gal separator.

Clean the centrifugal separator.

Unscrew the head lamps.

Take out the head lamps and pull out
the plug.
Note: Note the positions of the plugs.

Dismantle the head lamps.

Dismantle the head lamp casing and
hold it horizontally because the lamp
unit is not fastened.

Unlock the bracked and take out the
bulb.

Insert new bulb.

Reinstall in reverse sequence.
Fuse box - work station

Open the fuse holder.

Check the fuses.
Fuse box foot space
Note : Located in the electronics casing be-
hind the cover in the foot space.

Open the 4 screws of the cover.

Remove cover.

Open electronics casing.
Caution : Only our authorised service
department may open the casing and
replace the fuses.

Check the fuses.
Fuse box motor room
Note: The fuses FU 01 and FU 14 are lo-
cated in the motor compartment.

Replace defective fuses.
Note: Only use fuses with identical
safety ratings.
Checking the V-Belt
Check air filter and replace, if necessary
1
2
Changing the headlight bulb (option)
Replacing fuses
FU 01 Main fuse -- 60 A
FU 02 Gas cylinder fill level in-
dicator
B
5 A
FU 03 Safety relay
Multifunction display
B
7.5 A
FU 04 Blinker switch
A
10 A
FU 05 Motor control ignition B 10 A
FU 06 Oil cooler
A
25 A
FU 07 Program selection
switch
Waste container func-
tions
A 15 A
FU 08 Audible warning signal
reverse drive
B 10 A
FU 09 Left lighting A 7.5 A
FU 10 Right lighting
A
7.5 A
FU 11 Front work lights (low
beam)
A 10 A
FU 12 Vibrator system
Beacon lamp
B 20 A
FU 13 Water pump
3. Side brushes
B 15 A
FU 14 Fanmotor capacitor -- 40 A
FU 15 Motor control starter
C
20 A
FU 16 Motor control central C 30 A
FU 17 Motor control MPR coil
C
20 A
FU 18 Air conditioning control
(option) + cab
C 20 A
FU 19 Motor control battery
voltage
C 20 A
FU 20 Radiator fan C 25 A
29 EN