![background image](http://html1.mh-extra.com/html/karcher/km-170-600-r-lpg/km-170-600-r-lpg_manual_655039023.webp)
-
5
1
Operating hour counter
2
Charge warning lamp
3
Oil pressure warning lamp
4
Cooling water temperature warning
lamp
5
Motor suction air
6
Warning lamp fuel reserve
- blinks for reserve
- illuminates when gas bottle is empty
7
Indicator lamp (not connected)
8
Indicator lamp (not connected)
9
Indicator parking light (option)
10 Indicator light low beam (option)
11 Indicator light blinker (option)
12 Indicator lamp - forward driving direc-
tion
13 Indicator lamp - reverse driving direc-
tion
1
Drive pedal
2
Brake pedal
3
Parking brake
4
Blower lever
5
Horn/lighting/blinker (option)
Horn: Press the outside lever.
Lights: Rotate the outer ring
Blinking: Press the lever down or up
6
Steering wheel
7
Ignition lock
1
Warning blinking switch (option)
2
Ignition key
–
Position 0: Switch off engine
–
Position 1: Ignition on
–
Position 2: Start the engine
Loosen parking brake; press brake
pedal at the same time.
Activate the parking brake; press brake
pedal at the same time.
Open engine cover.
1
Screw for freewheeling
2
Special tool
Open the screw for the freewheeling by
about 1 revolution (counter-clockwise).
Use special tools.
Note
: The special tool (red wrench) is
located in a bracket underneath the
freewheel.
Caution
Do not move the machine for long distanc-
es without engaging self-propulsion; a
speed of 10 km/h should not be exceeded.
Close the screw for freewheeling all the
way.
Use special tools.
Read the operating instructions of the
engine manufacturer before start-up
and follow the safety instructions care-
fully.
Park the sweeper on an even surface.
Remove ignition key.
Lock parking brake.
몇
Warning
Only use replacement cylinders with 11 kg
contents of tested models.
Danger
Risk of injury!
–
Follow safety regulations for LPG vehi-
cles.
–
Formation of crusts and yellow-frothing
deposits on the gas cylinder indicate
leakiness.
–
Cylinders must be changed only by in-
structed persons.
–
Cylinders containing propellant gases
must not be changed in garages and
underground areas.
–
Do not smoke and use uncovered light
while changing the cylinder.
–
While changing cylinders, first close the
locking valve of the LPG cylinder firmly
and immediately put the protective cap
on the empty cylinder.
Loosen the screw on the safety bar and
swivel the bar upwards.
1
Protective cover
2
Gas hose with union joint
3
Gas withdrawal valve
Close gas drawing valve by turning it in
clock-wise direction.
Unscrew the gas hose (30-mm span-
ner).
Screw the protective cap onto the con-
necting valve of the empty gas cylinder.
Open the cliplock.
Replace the gas cylinder.
Observe the installation position of the
gas cylinder. The connection / ring
opening must point downwards.
Unscrew the protective cap from the
connecting valve of the gas cylinder.
Close the bracket closure.
Screw the gas hose to the connecting
valve of the gas cylinder (30-mm span-
ner).
Multifunction display
Operating elements
Ignition switch
Before Startup
Lock/ release parking brake
Moving sweeper without engaging
self-propulsion
Moving sweeper by engaging self-
propulsion
Start up
General notes
Install/replace gas bottle
22
EN
Summary of Contents for KM 170/600 R LPG
