MULTICAL® 803
Kamstrup A/S · Technical description · 5512-2360_A1_GB_02.2019
163
Type
no.
Module
Possible configuration after installation
41
Analog input module, with 2 x 0… 20 mA or
0…10 V
Input as 0…20 mA or 0…10 V. Input is read by MULTICAL®
for logging and display in the display. The two inputs can
be configured with measuring ranges, measuring unit and
decimal display.
These values can be changed via METERTOOL HCW.
43
PQT Controller
Module with the output for controlling of three-point
motor-operated valve. The module is used for regulating
power, flow and temperature.
The limit values and control parameters of the regulator
can be changed with METERTOOL HCW.
51
Kamstrup Radio GDPR
+ 2 pulse inputs (In-A, In-B)
Meter factor and preset of In-A and In-B can be changed
via METERTOOL HCW.
60
LON TP/FT-10
+ 2 pulse inputs (In-A, In-B)
Meter factor and preset of In-A and In-B can be changed
via METERTOOL HCW.
66
BACnet MS/TP
+ 2 pulse inputs (In-A, In-B)
Meter factor and preset of In-A and In-B can be changed
via METERTOOL HCW.
The MAC address can be changed via METERTOOL HCW.
67
Modbus RTU
+ 2 pulse inputs (In-A, In-B)
Meter factor and preset of In-A and In-B can be changed
via METERTOOL HCW.
The RTU slave address can be changed via METERTOOL
HCW.
80
2G/4G network module
+ 2 pulse inputs (In-A, In-B)
Meter factor and preset of In-A and In-B can be changed
via METERTOOL HCW.
82
Modbus/KMP TCP/IP
+ 2 pulse inputs (In-A, In-B)
Meter factor and preset of In-A and In-B can be changed
via METERTOOL HCW.
Protocol selection and IP setup can be changed via
METERTOOL HCW.
85
High Power Radio Router GDPR
+ 2 pulse inputs (In-A, In-B)
Meter factor and preset of In-A and In-B can be changed
via METERTOOL HCW.