MULTICAL® 803
Kamstrup A/S · Technical description · 5512-2360_A1_GB_02.2019
139
9.5
ø5.8 mm pocket sensor with connection head
ø5.8 mm pocket sensor with connection head consists of a ø5.8 mm Pt500 temperature sensor that is connected to
a replaceable sensor insert through a 2-wire silicone cable. The sensor insert is installed in an immersion pocket
fitted with connection head, see
Figure 11
. Connection of 4-wire cable takes place by leading the cable through the
appropriate hole in the connection head and install the 4 wires in the connection terminal of the sensor insert.
Ø5.8 mm sensor pocket with connection head is available with R½ (conical ½”) connection in stainless steel and in
lengths of 90, 140 and 180 mm. The outer diameter of the immersion pocket is ø8 mm. The construction with
replaceable sensor insert permits replacement of sensors without having to cut off the flow. Furthermore, the wide
range of immersion pipe lengths ensures that the sensors can be mounted in all existing pipe dimensions. The
stainless steel pockets can be used for mounting in PN25 systems.
Figure 11
Figure 12
A ø5.8 mm pocket sensor with connection head can, for example, be installed in a tee as shown in
Figure 12
.