Kalkhoff Bosch Cruise User Manual Download

Page: 437 / 550

English–

0 276 001 YYY | (12.10.12)

Bosch eBike Systems

Only for EC countries:

According to the European Guideline

2002/96/EC, electrical devices/tools that

are no longer usable, and according to the

European Guideline 2006/66/EC, defec-

tive or used battery packs/batteries, must

be collected separately and disposed of in

an environmentally correct manner.

The integrated battery pack in the drive HMI may only be re-

moved for disposal. Opening the housing shell can damage or

destroy the drive HMI.
Please return battery packs that are no longer usable to an au-

thorised bicycle dealer.

Li-ion:

Please observe the instructions in sec-

tion “Transport”, page English–6.

Subject to change without notice.

OBJ_DOKU-25177-003.fm Page 7 Friday, October 12, 2012 3:16 PM

Summary of Contents for Bosch Cruise







































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Bosch Cruise

Reviews:

Related manuals for Bosch Cruise

Brands by name

Popular brands

Kalkhoff Bosch Cruise, User Manual

Search results

Summary of Contents for Bosch Cruise

Reviews:

Related manuals for Bosch Cruise

Brands by name

Popular brands