Kalkhoff Bosch Cruise, User Manual

Page: 250 / 550

14 VIII User Manual Pedelec Xion
To switch your Pedelec off, press the diamond button on
the control panel for around two seconds whilst in the
start menu. This will take you to the sub-menu.
Navigate to the item
“Shutdown” using the arrow buttons
and confirm using the diamond button .
5.1.2 Buttons for power-assist level
•
You can specify the power-assist level using the
arrow buttons .
•
Each time you press an arrow button, the power
assist changes by one level.
•
If you press the upper arrow button, the level of
assistance increases by one level each time you
press it.
•
If you press the lower arrow button, the assistance
becomes weaker each time you press it.
5.2 Display
Back
Shutdown Shutdown
1 Speed
2 Power-assist mode/energy recovery
3 Battery charge state
4 Remaining range
5 Variably adjustable display
1
3
2
4
5
The display in the middle of the handlebar is divided into
five different display panels.
•
At the top on the right is your current 1 speed.
•
On the left is a display showing the
2
power-
assist mode you have selected or the level of
energy recovery.
•
In the middle on the right hand-side is the
3
battery symbol, which tells you the current charge
status of your Pedelec’s battery.
•
The remaining
4
range is displayed to the right
of the display for the
2
power-assist mode.
•
Below this you will see
5
the date or the time,
for example. In place of these, the following data
can also be called up:
•
Distance covered during the day (in km).
•
The journey time taken to cover this distance.
•
The average speed (in km/h).
•
The maximum speed reached
(in km).
•
The total mileage (in km).
•
The total journey time taken to cover this
distance.
•
The average speed based on this data
(in km/h).
•
Your personal contribution as the rider (in Wh).
•
The power consumption.