
Page 87 of 101
Chapter 12 System Maintenance
To maintain the performance and reliability of the system, the operator should clean and maintain the
system and
the accessories periodically.
12.1 Cleaning the System
To maintain the performance of the system,the system should be maintained periodically(less than half
a year),and ensure the system is well grounded and complies with the safety requirements.
Power off the system and disconnect it from the power supply before cleaning it.Or, electric shock or
system damage may result.
Steps are as follows.
1.
Wipe the screen, control panel and the surface of the system with a lint-free cloth dampened with75%
alcohol.
2.
Wipe the solidified objects around the keys on the control panel with the cotton swab and ensure
that the
objects will not come into the inside of the system.
3.
If the blood or contaminated objects adhere to the keys, wipe them with 70% isopropyl alcohol.
After cleaning the machine, functions of the machine will not be affected, check approach is: connect
the probe to
main unit and switch on, the machien can be booted up and image is ok.
12.2 Replacing the Fuse
The type of the fuse used in this system is 5HTP3.15-R (250V~, T3.15AH). The fuse should be
replaced by the service personnel or the designated technical personnel.
12.3 System Disposal
If the system,probes, biopsy brackets and other accessories have reached to validity period (The
system's
validity period is 5 years), you should dispose them in accordance with Waste Electrical and Electronic
Equipment (WEEE) Directive (2002/96/EC) or the requirements of the local laws.
For detailed information about disposing the electrical and electronic equipment, please consult the
manufacture or the local distributor. The manufacturer is not responsible for any damages caused by
improper
disposal.