Page 51 of 101
Select the PW mode parameter on the menu at the top left of the screen by using the Select knob,
press
Select knob chage state between
“
parameter item select state
”
and
“
parameter item adjust state
”
, rotate
the knob change parameter item for
“
parameter item select state
”
or paramter value for
“
parameter item
adjust state
”
. Press the Menu key to display/hide this menu.
Press Gain knob switch to display the B mode parameters, press Gain knob again switch to display the PW
mode parameters.
Figure 6-10 Parameters Adjustment in the PW Mode
6.5.2.1 Adjusting the Gain
Adjust PW gain can increase or decrease received signals,the brightness will changed accordingly.
Steps:
Rotate the Gain knob clockwise to increase the value.
Rotate the Gain knob anticlockwise to decrease the value.
6.5.2.2 Adjusting the Scale
Scale is adjusted to change the range of the speed displayed.
Steps:
Move cursor to [Scale] menu item and press Set key to adjust it.
Rotate Select knob to highlight the [Scale] menu item, press Select knob item to confirmation select
[Scale] item, and then Rotate Select knob to adjust it.
6.5.2.3 Adjusting the Baseline
Baseline represents the position of zero velocity or frequency.The velocity range in one direction can be
increased or decreased by adjusting the baseline.
Steps:
Move cursor to [Baseline] menu item and press Set key to adjust it.
Rotate Select knob to highlight the [Baseline] menu item, press Select knob item to confirmation select
[Baseline] item, and then Rotate Select knob to adjust it.