Kaixin DCU10 Operation Manual Download Page 20

Page: 20 / 102

Page 19 of 101

Station

Station key

Press it ot enter the workstation screen.

Preset

Preset key

Press it to enter the system setting screen.

Save IP

Save current image
parameters key

Press it to save the parameters setting of the current
imaging mode.

Reset IP

restore the preset
image parameters key

Press it to restore the parameters setting of the current
imaging mode from preset.

Biopsy

Biopsy key

Press it to activate the biopsy function.

Lito

Lito key

Press it to activate the lito function.

Menu key

Press it to hide/display the menu function.

Body Mark Body mark key

Press it to enter/exit the body mark status.

Comment

Text
annotation key

Press it to enter/exit the text annotation status.

Arrow

annotation key

Press it to enter/exit the arrow annotation status.

Clear

Clear key

Press it to remove all the annotations and measurements from

the screen.

Left/right key

● Press it to adjust the steer angle in PW \ Color/PDI status.

● Press it to move the cursor left or right in other status.

Up/down key

Press it to adjust the volume of the frequency spectrum

in the real time PW mode.

Ctrl +
blank

Typewriting
selection key

Press the combined keys to select the desired typewriting.

Other keys

Achieve the functions similar with the keys on the keyboard
of the computer.

Function Keys

Power key

Press it to power on or off the system or to

enable standby mode.

TGC slide pot

● There are 8 TGC slide pot.

● Move it to adjust the gain of the specified depth.

Patient

Patient key

Press it to enter the patient information screen to create or
edit the patient information.

Probe/

Exam

Probe and exam mode
selection key

Press it to enter the probe and exam selection mode to

select the probe and the application part.

Review

Review key

Press it to enter the file review screen.

End Exam

End the exam Key

Press it to end the exam of the current patient.

B mode key

Press it to enter the B mode.

Summary of Contents for DCU10







































































































Search results

Summary of Contents for DCU10

Reviews:

Kaixin DCU10, Operation Manual, Page: 20 / 102

Search results

Summary of Contents for DCU10

Reviews: