Page 30 of 101
Figure 4-3 Probe/Exam Presetttings Screen
Steps for editing the exam type are as follows.
1.
Click the drop-down menu beside [Probe name] to select the desired probe.
2.
Select the exam type in the list of [The exam of system] and click > to add the selected exam type to
the list of [The exam of probe].
Click >> to add all the exam types.
Select one exam type the list of [The exam of probe] and click < to delete it.
Click [Up] or [Down] to move the selected exam type up or down.
Steps for defining an exam are as follows.
1.
Click [Exam Template] to select one template.
2.
Input the defined name for the selected exam template at [Exam Mode] and click [Add] to add it.
The defined exam type displays in the list below.
Select exam type in the list and click [Rename], a prompt box pops up. Input the new name in this
prompt box and click [OK] to rename an exam type.
Select the desired exam type in the list and click [Delete], a prompt box pops up. Click [OK] in the
prompt box to delete an exam type.
4.3 Presetting the Measurements
You can preset the obstetric formulas, the heart rate and the distance between the measurement scales
in the Measure Preset screen.