Kaixin DCU10 Operation Manual Download Page 80 | Manualshive

Page: 80 / 102

Kaixin DCU10 Operation Manual Download Page 80

Page 79 of 101

Chapter 10 Managing Images/Data

You can save images after scanning the images. The saved patient data can be backup to the USB

storage devices for future use.

10.1 Saving the Image/Cine

The data is saved to the built-in disk of the system by default. You can also export the data to the
USB storage devices or DICOM server. For details, refer to Section 10.5 Saving Data.
Press the Save key on the control panel in the frozen mode to save the current screen as an image.
Press the Cursor or Cine key on the control panel in the frozen mode to activate the marker, move

the

marker to [Save Film] by using the trackball, and press the

Set

key to save the cine.

10.2 Reviewing the Image/Cine

Current patient
You can view the saved images or cines in the Review screen.

Steps are as follows.
1.

Press the Review key on the control panel to enter the Review screen, as shown in Figure10-1.
The thumbnail images display in the [File List].

Figure 10-1 Review Screen

«
...
78
79
80
81
82
...
»

Summary of Contents for DCU10







































































































Reviews:

No comments