Kaixin DCU10 Operation Manual Download Page 62 | Manualshive

Page: 62 / 102

Kaixin DCU10 Operation Manual Download Page 62

Page 61 of 101

Steps:
1.

Press the Caliper key to activate the measurement,and the measurement menu displays on the top left of
the screen.

2.

Select [Circle/Area] on the menu by moving the trackball and press Set to confirm. Select[Ellipse] on the
pop-up menu. A marker displays on the image.

3.

Move the marker to the starting point by using the trackball, press Set to fix the marker and

the second

marker displays.

4.

Move the second marker to the end point by using the trackball and press Set. An ellipse

displays on the

image.You can also press Update on the control panel, move the trackball to the axes to adjust

their

lengths. Then press Set to confirm.

5.

The system automatically calculates the area and circumference, and the measurement result displays in the
result box.

6.

If necessary, you can repeat step 2-5 to perform the next area and circumference measurement.

Trace
It is used to measure the circumference and area by operating the trackball along the target

object.

Steps:
1.

Press the Caliper key to activate the measurement,and the measurement menu displays on the top left of
the screen.

2.

Select [Circle/Area] on the menu by moving the trackball and press Set to confirm. Select[Trace] on the
pop-up menu. A marker displays on the image.

3.

Move the marker to the starting point by using the trackball, press Set to fix the marker and the second
marker displays.

4.

Move the second marker along the target object by using the trackball.

5.

Press Set to confirm and the system automatically calculates the area and circumference, and the
measurement result displays in the result box.

6.

If necessary, you can repeat step 2-5 to perform the next area and circumference measurement.

8.4.1.3 Volume

Three-distance
It is used to measure the volume of a cuboid shaped object by measuring the length, the width

and the depth.

Steps:
1.

Press the Caliper key to activate the measurement, and the measurement menu displays on the top left
of the screen.

2.

Select [Volume] on the menu by moving the trackball and press Set to confirm. Select [3 Dist] on
the pop-up menu. A marker displays on the image.

3.

Move the marker to the starting point by using the trackball, press Set to fix the marker and the second
marker displays.

4.

Move the second marker to the end point by using the trackball and press Set to confirm. A line connects
these two points.

5.

Repeat step 3-4 to perform a distance measurement for the width.

6.

Rescan an image which is perpendicular to the previous image and repeat step 3-4 to perform a distance
measurement for the depth.The system automatically calculates the volume, and the measurement result
displays in the result box.

Ellipse distance

Steps:

«
...
60
61
62
63
64
...
»

Summary of Contents for DCU10







































































































Reviews:

No comments