Kaixin DCU10 Operation Manual Download Page 13

Page: 13 / 102

Page 12 of 101

If the system has generated the interference (confirmed by powering on and off the system), you or
the qualified service personnel should solve the problem by following the steps as below:

Reposition the affected system.

Place this system further away from the affected system.

Supply power to this system in other ways other than the way used currently.

Contact the manufacturer as soon as possible.

1.3.4 Signs and Meaning

Sign

Meaning

Caution! Please consult the accompanying document.

Warning, danger of electric shock!

Type BF applied part

Disconnect (the mains supply)

Connect (the mains supply)

Power on/standby button

Footswitch

Cable connecting the video printer

Protective earth

Serial port

Equipotentiality

Alternating current

Degree of IP protection

Non-ionizing electromagnetic radiation

Manufacturer

Date of manufacturer

Summary of Contents for DCU10







































































































Search results

Summary of Contents for DCU10

Reviews:

Kaixin DCU10, Operation Manual, Page: 13 / 102

Search results

Summary of Contents for DCU10

Reviews: