Page 81 of 101
10.5 Saving Data
You can save the patient data, images or cines to the hard disk and send them to the USB storage
devices and DICOM server.
10.5.1 Saving to USB Storage Devices
Steps are as follows.
Connect the USB storage device to the system and the bottom right of the screen displays the icon of USB.
Save the images or cines as described in Section 10.1 Saving the Image/Cine.
Press Review to enter the Review screen and select the images/cines.
Or click [Select All] or enable [Mult Sel] at the right to select the images/cines.
Click beside the drop-down menu under the [Send to] to select [USB storage device] and click[Send to]
to save the images/cines in the USB storage device.
10.5.2 Saving to DICOM Server
Ensure that the DICOM server is connected with the system before sending the images/cines.
Current patient images/cines
Steps are as follows.
1.
Press Review to enter the Review screen and select the images/cines.Or, click [Select All] or enable [Mult Sel]
at the right to select the images/cines.
2.
Click beside the drop-down menu under the [Send to] to select [DICOM] and click [Send to] to save the
images/cines in the DICOM server.
All patients data
Steps are as follows.
1.
Press Review to enter the Review screen and click [Wstation] to enter the Wstation screen.
2.
Select patient in the [Exam List] by using the trackball and press the Set key to confirm.
Or, click [Select All]
or enable [Mult Sel] at the right to select the images/cines.
3.
Click beside the drop-down menu under the [Send to] to select [DICOM] and click [Send
to] to save the
images/cines in the DICOM server.