
Page 22 of 101
Clear the history
measurement data
and start a new exam
Create a
patient
Select the
saved patient
Select the
probe
and exam type
Select the
imaging mode
Review/annotate
the image
Perform
measurements
Save the
image
Complete the scan
and save the patient
report
Send data to printer
/server/USB device
End the exam
Perform a scan
Figure 2-7 Regular Examination Workflow
For creating a patient, refer to Section 5.1 Creating a Patient.
For selecting the probe and exam type, refer to Section 5.2 Selecting the Probe and Exam
type.
For selecting the imaging mode, refer to Chapter 6 Optimizing the Image.
For reviewing/annotating the image, refer to Chapter 7 Working with the Images.
For performing measurements, refer to Chapter 8 Measurements and Calculations.
For saving the image, refer to Section 10.1 Saving the Image/Cine.
For sending data to printer/server/USB storage device, refer to Section 10.4 Printing
the Image and Section 10.5 Saving Data.
For completing the scan and saving the patient report, refer to Chapter 9 Report.
For ending the exam and clearing the history measurement and starting a new
exam, refer to Section 5.3 Ending the Exam.