JUMO flowTRANS MAG H01, Operating Manual

Page: 82 / 260

7 Startup
82
7.4.2 Configuration for transmitters with a single-compartment housing
Set the jumpers on the backplane according to the following table:
A JUMO flowTRANS MAG S/H - compact design
B JUMO flowTRANS MAG - remote mount design
(1) Case lid
(2) Transmitter plug-in module
(3) Mounting screws
(4) Backplane (in the transmitter housing)
(5) Jumper (BR905, BR906) for communication
(6) Jumper (BR901) for active/passive current output
(7) Jumper (BR904) for active/passive pulse output
(8) Jumper (BR903) for integral/remote mount design (compact/isolated)
(9) Jumper (BR902) for hardware write protection
Jumper Position Function
BR901 passive For FOUNDATION Fieldbus set to "passive" position
BR903 Integral Transmitter with compact design
Remote Transmitter with remote mount design
BR904 active No function for PROFIBUS-PA
passive
BR905, BR906 PA/FF Digital communication via FOUNDATION Fieldbus