JUMO flowTRANS MAG H01, Operating Manual

Page: 125 / 260

125
8 Parameterization
8.4.5 Menu: Input/Output
Italics = Parameter can only be viewed in the "Advanced" password level
Digital Input setup
If the filling action is stopped before reaching the configured filling quantity, the filling counter is reset to
zero. The interrupted filling is
not continued on restarting.
Menu/parameter Value range Description
Display/Operator Pages/ Operator Page 1 (n)
Bargraph Flowrate [%] Selection of the bar graph of the displayed measured
value
You can choose between the measured values dis-
played in the value range.
Current output [mA]
Menu/parameter Value range Description
Input/Output
... Digital Out Mode
Selection of "... Digital Out Mode" submenu
... Logic Setup Selection of "... Logic Setup" submenu
... Pulse Setup Selection of "... Pulse Setup" submenu
Digital Input Setup No Function, Totalizer Reset
(all), Flowrate to Zero,
System Zero Adjust,
Totalizer Stop (All),
Dual Range
a
, Start/Stop
Batching
a
Operating mode selection for the digital input
You can choose between six operating modes:
•
Totalizer reset for all totalizers (forward, reverse
and difference totalizer)
• Flowrate to Zero
• System Zero Adjust
• Totalizer stop for all counters (forward, reverse
and difference totalizer)
• Toggling between the measuring range 1 and 2
(Q
max
and Q
max
2)
a
• Start / Stop the filling function (batch)
a
Default setting: Flowrate to Zero
Current Output Selection of "Current output" submenu
a
Only available for JUMO flowTRANS MAG S02/H02
?