JUMO flowTRANS MAG H01, Operating Manual

Page: 181 / 260

181
13 Technical data
13 Technical data
13.1 General information
13.1.1 Reference conditions according to EN 29104
13.1.2 Maximum measurement deviation
JUMO flowTRANS MAG S01
JUMO flowTRANS MAG S02
JUMO flowTRANS MAG H01
JUMO flowTRANS MAG H02
Measuring medium temperature 20 °C (68 °F) ±2 K
Ambient temperature 20 °C (68 °F) ±2 K
Voltage supply Nominal voltage according to the nameplate
V
n
±1 %, frequency f ±1 %
Installation conditions Supply side > 10 x DN pipe section
Return side > 5 x DN pipe section
Warm-up phase 30 min
IMPORTANT (NOTE)!
Q
max
DN  See table chapter 7.6 "Nominal width, measuring range", page 92.
Calibration (pulse output) Nominal width
±0.4% of the measured value, ±0.02% QmaxDN
(standard) DN 3 to 2,000
±0.2% of measured value, ±0.02% QmaxDN (option-
al) DN 10 to 600, 800
Calibration (pulse output) Nominal width
±0.3% of the measured value, ±0.02% QmaxDN
(standard) DN 3 to 600, 800
±0.4% of the measured value, ±0.02% QmaxDN
(standard) DN 700, 900 to 2,000
±0.2% of measured value, ±0.02% QmaxDN (option-
al) DN 10 to 600, 800
Calibration (pulse output) Nominal width
±0.4% of the measured value, ±0.02% QmaxDN
(standard) DN 3 to 100
±0.2% of measured value, ±0.02% QmaxDN (option-
al) DN 10 to 100
Calibration (pulse output) Nominal width
±0.3% of the measured value, ±0.02% QmaxDN
(standard) DN 3 to 100
±0.7% of the measured value, ±0.02% QmaxDN
(standard) DN 1 to 2