JUMO flowTRANS MAG H01, Operating Manual

Page: 150 / 260

8 Parameterization
150
8.6.1 Configuration
The filling function configuration is menu-driven via the LCD display.
If you want to control the filling action via the digital input DI, you need to configure the following setting
in the "
Input/Output " menu:
The following settings must be configured to actuate the filling valve:
Menu/parameter Value range Description
Input/Output/... Digital Out Mode
a
Function DO1/DO2 Logic/Logic Selects the operating mode for the Digital Input Setup
•
Start/Stop Batching (filling function)
a
Only available for JUMO flowTRANS MAG S02/H02
Menu/parameter Value range Description
Input/output
Digital Input Setup Start/Stop batching Selection of functions for digital outputs DO1 and
DO2
•
Logic/Logic:
- DO1 = Binary output
- DO2 = Binary output
Menu/parameter Value range Description
Input/Output/... Logic Setup
DO1 signal Batch end contact The menu is only displayed if the "Logic/Logic" func-
tion has been selected in the "DO1/DO2 Function"
menu.
This menu is not displayed in the default setting.
•
Batch end contact:
The digital output is activated when the config-
ured filling quantity is reached.
DO2 signal