JUMO flowTRANS MAG H01, Operating Manual

Page: 142 / 260

8 Parameterization
142
Italics = Parameter can only be viewed in the "Advanced" password level
The fingerprint database built into the transmitter can be used to compare the values at the time of fac-
tory calibration or startup with the values currently acquired.
This means that changes in the measuring system can be detected at an early stage, and appropriate
actions can be initiated.
Menu/parameter Value range Description
Diagnostics/ Diagnostics Values
SNR Value Display only Display of the current diagnostics values for service
purposes only
Slope Value
Slope Variation
Reference
Signal Ratio
(Signal difference)
Signal Max
(max. value of the pos. signal)
Signal Min
(max. value of the neg. sig-
nal)
Signal Error
(Signal error share)
NV Reset/s
Amplification Int.
Menu/parameter Value range Description
Diagnostics/ Fingerprints
a
Factory F.P. Selection of the "Factory F.P." submenu
Startup F.P. Selection of the "Startup F.P." submenu
On Demand F.P. Selection of the "On Demand F.P." submenu
a
Only available for JUMO flowTRANS MAG S02/H02
Menu/parameter Value range Description
Diagnostics/Fingerprints/ Factory F.P.
a
Sensor Coil R. Display only The factory fingerprint is created when calibrating the
devices at the factory.
Elec. Coat. QE1
Elec. Coat. QE2
Elec. Imp E1-GND
Elec. Imp E2-GND
Tx Check CMR
Tx Check 5 m/s
Tx Check 10 m/s
a
Only available for JUMO flowTRANS MAG S02/H02