JUMO flowTRANS MAG H01, Operating Manual

Page: 186 / 260

13 Technical data
186
13.2.8 Insertion length
The flanged devices comply with the insertion lengths specified according to VDI/VDE 2641, ISO 13359
or according to DVGW (work sheet W420, design WP, ISO 4064 short).
13.2.9 Signal cable length and preamplifier
For devices in the remote mount design, the electrical connection between the transmitter and sensor is
made via a signal cable.
Transmitter housing
design Single-compartment
housing Ex-zone 2 or outside of Ex-area
Maximum signal cable
length
a
a
At a minimum conductivity for the measurement medium of ≥ 5 µS/cm
Without preamplifier 50 m (164 ft)
With preamplifier 200 m (656 ft)
Scope of delivery 5 m (16.4 ft) included
Signal cable, part no. 00648906
Transmitter housing
design Single-compartment
housing Ex-zone 1 Ex-zone 2 or
Outside the Ex-area
Maximum signal cable
length
a
Without preamplifier 50 m (164 ft)
With preamplifier -
Scope of delivery 5 m (16.4 ft) included
Signal cable, part no. 00648906
Transmitter housing
design Dual-compartment
housing Ex-zone 1
Maximum signal cable
length
a
Without preamplifier 10 m (164 ft)
With preamplifier -
Scope of delivery 10 m (32.8 ft)
fixed installation
Signal cable, part no. 00648907
406018/2-0
406018/2-1
406019/2-0
406019/2-1
IMPORTANT (NOTE)!
Additional requirements for signal cable length for use of optional functions  see chapter 9 "Advanced
diagnostics functions", page 153