JUKI HZL-600, Instruction Manual

Page: 21 / 108

17
Put the bobbin in the bobbin case.
* Place the bobbin so that thread winds
counterclockwise.
Thread groove
A
and
B
by pulling
the thread end.
* It will be easier to thread grooves when you
press the bobbin lightly with your finger.
Thread guide
C
by pulling the thread
to left side.
1
3
2
B
A
Setting the bobbin
C
18
Cut the thread with the built-in cutter
F
.
5
Close the hook cover.
6
F
You can start to sew in this condition (without
pulling up the bobbin thread), however, if you want
to sew with the bobbin thread pulled out, refer to
“Pulling up the bobbin thread” in the page 22.
Thread to guide
D
and
E
leave the thread
underneath. (Thread guide
E
first and it
will thread to guide
D
as well.)
* When pulling bobbin thread, bobbin rotates
counterclockwise. If bobbin rotates clockwise,
put the bobbin upside down.
4
D
E
C
19