JUKI HZL-600 Page 97 Instruction Manual Download

Page: 97 / 108

Adjust the height of legs so that the top

surface of Wide Table is the same height

of sewing machine body.

How to install Wide Table

Remove auxiliary bed.

Open legs of Wide Table until they stop

securely at the stopping position.

Assemble Wide Table to sewing machine

body.

Attach it to free arm of sewing machine.

* Don't put any heavy materials on the Wide Table.
* Don't move sewing machine with Wide Table attached.

Attention

Install the bobbin case holder.

Install the bobbin case holder so that points and

touch each other.

Install the throat plate.

When attaching the throat

plate, align the positioning

pins with holes of throat plate.

Machine Maintenance

When lint and/or dirt has built up, it may cause machine

failures. Therefore, clean the machine frequently.

Bobbin case

holder

Throat plate

Remove the throat plate

Remove needle and presser foot and remove

the needle plate by using T-shape screwdriver.

Remove the bobbin case holder.

Remove lint and dirt.

Remove lint and dirt around the feed dog and bobbin

case holder with the cleaning brush.

Attention

Always must be disconnected plug from

socket-outlet before remove throat-plate

and remove bobbin-case-holder.

Summary of Contents for HZL-600













































































































Search results

Summary of Contents for HZL-600

Reviews:

Related manuals for HZL-600

Brands by name

Popular brands

JUKI HZL-600, Instruction Manual

Search results

Summary of Contents for HZL-600

Reviews:

Related manuals for HZL-600

Brands by name

Popular brands