JUKI HZL-600, Instruction Manual

Page: 93 / 108

89
Elongation
Pattern No.
One-point 24~38
One-point 24~33
One-point 13~18
↑ Adjusting range is from size 1 to size 5. (Default setting is size 3.)
↑ The size is now changed.
The length of the patterns (stitch pattern
F600
No.24 ~ 38,
F400
No.24 ~ 33,
F300
No.13 ~ 18)
can be adjusted.
* Select a pattern
which size can be
elongated.
9
Example) changing to size 5
Press
Press
Press
Press
* The setting is memorized even when the machine
is turned off and on.
F600
F400
F300
90
Message catalog
Message Cause (Reason to display such messages)
1
A. When “start/stop”, “reverse stitch” or “thread-trimming” button
is pressed while the presser foot is raised.
B. When presser foot is raised while sewing.
2
A. When one of the buttonhole stitches is selected and the
buttonhole sensor pin is not connected, the machine starts to
sew.
3
A. When a stitch pattern other than buttonholes is selected but
the buttonhole sensor pin is connected, the machine starts to
sew.
4
A. When in the mode, user attempts to select stitch
patterns more than the maximum number of memory (70).
5
A. When in the mode and more than one stitch pattern is
selected, user attempts to move to mode and/or
.
B. When in the mode and more than one stitch pattern is
selected, user presses the button for more than two
seconds (deleting all).
C. When in the mode and more than one stitch pattern is
selected, user presses the button (calling a memory).
6
A. When the process of saving a pattern into folder is completed.
7
A. When in the option setting, settings which will be kept after
turning off the machines are changed. (Thread trimming by
foot controller, LCD contrast, buzzer volume and language
setting)
8
A. When the setting of the machine is changed to twin needle
sewing (option setting).
9
A. When in twin needle sewing, a stitch pattern other than twin
needle sewing is selected.
10
A. When the motor is locked, the machine stops temporarily for
safety.
91