JUKI HZL-600, Instruction Manual

Page: 68 / 108

66 65
Applique (2)
Attention
To make the stitch unconspicuous, an applique can be sewn.
Seam allowance
2
Put the pattern paper onto the wrong side
of the fabric and fold the seam allowance
at the finish line.
1
Cut the applique fabric with seam
allowance of 3~5mm.
Pattern
No.
Direct 6
Quilting 01~04, 35~37
Quilting 01~04, 07, 08
Presser
foot
Manual buttonhole presser foot (I)
Open toe presser foot (O)
3
Put the applique fabric on the base fabric.
T emporarily fix it with basting stitches or
glue.
4
Turn the hand wheel towards you and
start sewing along with the outer side of
the applique fabric.
When you start sewing, the machine will automatically
sew 3 lock stitches.
* When sewing steep angles, keep the needle inside
the fabric, raise the presser foot, change sewing
direction and sew slowly.
5
Lock stitch at the end of sewing.
Push the reverse stitch button and the machine will
automatically sew 3 lock stitches.
It is better to lock stitch at the outer side of the applique
fabric.
* Usually center needle position is used for appliqué
stitches but right or left needle position can be used .
Changing needle position: Refer to page 81
Basting
F600 Only
F600
F400/F300
Pattern paper
Turn OFF the power
switch before replacing
the presser foot.