JUKI HZL-600, Instruction Manual

Page: 15 / 108

Speed control
11
Speed control
Speed controller
Maximum sewing speed can be freely set by the speed
controller.
Faster speed
Slower speed
Faster speed
Slower speed
Thread trimming
foot switch
Foot controller
To run the machine, press the foot controller.
The harder you press, the faster the machine sews.
Speed controller will set the maximum sewing speed.
Pressing harder → faster speed
Pressing weaker → slower speed
“Thread trimming foot switch”
When the heel side of the foot controller is pressed,
the threads are trimmed.
→ It is also possible to cancel this function.
(Refer to page 82.)
* Always clean the foot controller.
It is important that you do not place any objects on the foot
controller as it may cause injury to the user and may cause
malfunctions.
The knee lifting lever is useful when a guilt is being sewn and
for other projects that require the use of both hands. With the
knee lifting lever, you are able to control the position of the
presser foot without using your hands.
Insert the knee lifting lever so that concave and convex meet.
Push the lever to right-hand side to lift the presser foot.
The presser foot is lowered when the lever goes back to the
original position.
* Do not touch the knee lifting lever while sewing.
It may cause a deformation of a stitch pattern.
12
Presser foot lifting lever and installation of knee lifting lever
Presser foot lifting lever
Installation of knee lifting lever
The presser foot can be up or down position by using
the presser foot lifting lever.
1
Lowered position …… Presser foot should be lowered
when sewing.
2
Ordinary lift position …… This position is used for fabric
removal and/or changing the
presser foot.
3
Extra lift position …… This position is used to put heavy
materials underneath the presser
foot.
* Be careful that the presser foot and the needle should not
interfere when the needle is in down position and the
presser foot is raised to the extra lift position.
Presser foot lifting lever
Presser foot
Knee lifting lever
convex portion
concave portion
1
2
3
1
2
3
Lifting
F600 / F400
13