JUKI HZL-600, Instruction Manual

Page: 70 / 108

68 67
Stitch in ditch quilting
Pattern No. Direct 1
Presser
foot
Edge sewing
presser foot (R)
This is for quilting the edge of patchworks and appliqués.
The machine will sew the lower (thinner) side of the fabric
layers. As a result, the stitches will not be noticeable and
have an effect to make the design look three dimensional or
emphasized.
2
Put the guide of the presser foot along
with the crease and sew.
The needle enters behind the guide, so that the edge
of the crease can be sewn.
1
Put the top layer of fabric with patchwork
and/or appliqués, quilting cotton and
bottom layer of fabric together by pin or
basting stitches.
Curved concealed quilting
Use manual buttonhole presser foot (I) or the open toe
presser foot (O). Sew curves by lifting the presser foot and
changing the direction very often.
Also this can be done by free motion with the quilt presser
foot. (Refer to page 69.)
* If the desired points can not be sewn, adjust the
needle position.
Needle position change: refer to page 81
F600 Only
Attention
Turn OFF the power switch
before replacing the presser
foot.