JUKI HZL-600, Instruction Manual

Page: 85 / 108

81
Change of needle position
Example) change the needle position of zigzag stitch to left needle position.
* Default setting is center needle position.
2
Press
Press
Press
Press
It is now changed to left needle position.
* In case of a combined stitch pattern, if the
needle position is changed, the needle position
of the selected patterns is all changed to the
same needle position at the same time.
However, if letter is included in the combined
stitch pattern, needle position will not be
changed.
* After a change of needle position and in the
event that other stitch pattern is selected, the
sewing machine goes back to the default setting.
82
Setting the
thre
ad trimming foot switch to OFF
In order to avoid trimming the thread by mistake while sewing,
you can set the thread trimming foot switch to “off” beforehand.
The thread trimming foot switch is now
turned off.
* There is not a change in the display, however,
even if the foot switch is pressed, threads will
not be trimmed.
* The setting is memorized even when the machine
is turned off and on.
3
Press
Press
Press
Press
83