JUKI HZL-600 Page 36 Instruction Manual Download

Page: 36 / 108

Straight stitch

Attention

Pattern No.

Direct 1

Presser foot

Standard presser

foot (A)

Thread tension Auto

Sewing start

Pull the needle and bobbin threads under the presser

foot to the rear of the machine and lower the presser foot

to start sewing.

Sewing end

Stop sewing and push the thread trimming button to trim

the threads.

Push the thread trimming button to trim the threads.

Push heel side of the foot controller to trim the threads.

* This function can be cancelled.

(Refer to page 82.)

* You can also cut the threads by the thread cutter at

the face plate cover.

Thread trimming

foot switch

This means presser foot is up.

Lower the presser foot to start

sewing.

Turn OFF the power switch

before replacing the presser

foot.

Summary of Contents for HZL-600













































































































Search results

Summary of Contents for HZL-600

Reviews:

Related manuals for HZL-600

Brands by name

Popular brands

JUKI HZL-600, Instruction Manual

Search results

Summary of Contents for HZL-600

Reviews:

Related manuals for HZL-600

Brands by name

Popular brands