JUKI HZL-600 Page 45 Instruction Manual Download

Page: 45 / 108

Finish line

Fabric

(right side)

Fabric

(wrong side)

Fabric

(wrong side)

Guide

Fabric

(wrong side)

Folded edge

Guide

Needle

Folded

edge

Guide

Align the guide of the presser foot with

the folded edge.

Turn the hand wheel and adjust with

the zigzag width adjusting dial so that

stitches reach the folded edge.

* Pay attention so that needle will not hit the

presser foot.

Position the folded edge against the guide

and sew.

Turn over the fabric after sewing.

Blind stitch

Fabric

(wrong side)

Fabric

(wrong side)

Basting line

Fabric

(wrong

side)

0.5 to 0.6 cm

Fabric

(wrong side)

Finish line

0.5 to 0.6 cm

Finish line

Sewing overcasting stitches on the edge

of fabric.

● Refer to pages 39 and 40 for overcasting stitches.

Basting.

Fold from basting line.

Leave 0.5 to 0.6 cm.

Folding fabrics

Pattern No.

Direct 8

Practical 13 (Light-

weight material)

Practical 14

(Stretchy fabrics)

Presser foot Blind stitch presser

foot (D)

Pattern

number

Attention

Turn OFF the power switch

before replacing the presser

foot.

Summary of Contents for HZL-600













































































































Search results

Summary of Contents for HZL-600

Reviews:

Related manuals for HZL-600

Brands by name

Popular brands

JUKI HZL-600, Instruction Manual

Search results

Summary of Contents for HZL-600

Reviews:

Related manuals for HZL-600

Brands by name

Popular brands