JMR electronics MARLIN FC-SATA300/SAS User Manual Download Page 37

Page: 37 / 135

Global View Panel -

Shows the available systems that are connected within your network.
Click on the system you would like to manage and follow the login
prompts when the next screen appears.

Task Bar -

Shows the IP address of the server and the user’s name.

Menu Bar

Table 1. Menu Bar Review depicts the arrangement and provides a brief
description of each of the sub menus that appear in the drop down menus.

Table 1. Menu Bar Review

MARLIN

4-5

RLLIIN

16-Bay 4G FC-SATA300/SAS RAID Array Management Users Guide Rev B

Menu Option

Sub-Options

Description

Application

About

Gives product information and version
level.

Refresh

Refreshes all information on the
application including physical device
information, logical configuration, and
status information.

Exit

Exits JMR Storage Manager.

Array

Create Array

Launches the array creation wizard and
allows you to create a new array
configuration.

Delete Array

Deletes the selected array from the
system.

Expand Capacity

Expands the capacity of the selected
array by adding drive members to it.

Dedicated Hot-Spare Config Assigns a selected member drive in an

array set to be the spare only for that
array, thus it is dedicated to the selected
array set.

Initialize Array

Initializes or reinitializes the selected
array. Warning! This will destroy all data
on the array and its associated logical
volumes.

Verify Integrity

Verifies the parity integrity of the selected
array.

Rebuild Array

Starts a manual rebuild operation for the
selected array.

Flash LEDs

Manually activates LEDs to blink for the
drives of the selected array.

Properties

View and modify the properties of the
selected array.

Summary of Contents for MARLIN FC-SATA300/SAS








































































































































Search results

Summary of Contents for MARLIN FC-SATA300/SAS

Reviews:

Related manuals for MARLIN FC-SATA300/SAS

Brands by name

Popular brands

JMR electronics MARLIN FC-SATA300/SAS, User Manual

Search results

Summary of Contents for MARLIN FC-SATA300/SAS

Reviews:

Related manuals for MARLIN FC-SATA300/SAS

Brands by name

Popular brands