JMR electronics MARLIN FC-SATA300/SAS User Manual Download Page 124

Page: 124 / 135

Enclosure ID

Displays the shelf position of the enclosure as 1, 2, 3,
etc.

Urgency Tone

Displays the urgency tone as Silent or Ringing.

Alarm State

Displays the alarm state as OFF if it is Silent, or ON if
it is ringing.

Alarm Muted

Displays the muted state of the alarm, No is shown in
this example.

Alarm Audible Displays if the sound of the alarm can be heard; Yes if

it is On and not muted. It will show No, if it is OFF
and the muted state is Yes.

Alarm Visible

Displays if the alarm is visible on the GUI; Yes if it is
On and Ringing. It will show No if it is OFF and not
ringing.

Fan

Figure 142. Fan Properties Window

The following fields are described for the Fan properties.

Status

Displays the fan function (status) as normal or critical.

Enclosure ID

Displays the shelf position of the enclosure as 1, 2, 3,
etc.

Variable Speed Device

Displays the variable speed as Yes or No.

Speed

Displays the speed value. Speed 4 is shown in this

example.

MARLIN

5-6

RLLIIN

16-Bay 4G FC-SATA300/SAS RAID Array Management Users Guide Rev B

Summary of Contents for MARLIN FC-SATA300/SAS








































































































































Search results

Summary of Contents for MARLIN FC-SATA300/SAS

Reviews:

Related manuals for MARLIN FC-SATA300/SAS

Brands by name

Popular brands

JMR electronics MARLIN FC-SATA300/SAS, User Manual

Search results

Summary of Contents for MARLIN FC-SATA300/SAS

Reviews:

Related manuals for MARLIN FC-SATA300/SAS

Brands by name

Popular brands